MZG series MZG-2x1000 door automatic submerged arc welding machine is a special equipment for H-beam welding. The H-beam is placed on the door automatic submerged arc welding machine bays, two on the gantry submerged arc welding machine consists of two ultra-low-speed gear driven to do, uniform forward on the rail of the ship carried H-beam welding position . AC drive motor inverter control, speed and stability, figures show good reliability and arc guide and mechanical tracking mechanism, auto-correction, to ensure accurate alignment of the weld torch, welding H-beam weld reach out to national standards.
Equipment technical parameters:
Applicable H-beam Dimensions: Width :200-800MM height :200-1500MM;
Welding power machine: MZ-1-1000
Welding control motor: YVP90L-1.5KW * 2
Use: 380V/3PH/50HZ
Maximum travel speed machine: 5000MM/MIAN; weld travel speed :250-2500MM / MIN;
Speed ​​mode: Variable Speed
About telescopic column adjustment: hand-tuning
Flux recovery unit; Capacity: 2 × 100KG
Total machine width: 5800MM; orbital distance: 5000MM;
Wire coil weight :20-350KG; wire diameter :3.2-5MM